Transformer Mandrel
Our Product & Services
We manufacture Winding Mandrels for Transformer Coils that are suitable for Vertical as well as Horizontal Winding Machines.
The Coil Lifting Fixture is used to handle and move the individual or assembled transformer coils of diverse diameters, radial depths, lengths, and ...
Formertron manufactures Conventional and Semi-Automatic Winding Machines ranging from 1 Ton to 25 Ton Capacity with a proven and robust design. ...
Formertron manufactures Vertical Winding Machine from 3 Ton to 50 Ton capacity. The Vertical Winding Machines are of two types as stated below:-
The Core Building/Stacking Table is installed to Stack Laminations, assemble the Core and to lift the Core vertically. ...
Core To Core Coil Assembly Work Station / Assembly Platform is used for Assembly of Transformer Active Parts. The equipment helps in easy access of the Active Part and ...
Formertron manufactures the following Bending Tools that are required in the Transformer Industry ...
Formertron manufactures Inter-bay Motorized Trolleys from 5 Ton to 40 Ton Load Carrying Capacity. These Trolleys are used for transferring ...
The Phase Assembly Platform is in a four-segment construction to maximize the circularity of the aperture.
Vertical travel of the entire platform is synchronized to avoid tilting on any side. It is ...
Transformer coils after winding need to be compressed to a specific height based on the transformer design. During the winding process the height of the winding increases due to the gap in each disc.
Formertron manufactures De-Coiler Systems for unwinding of copper conductors used in the transformer industry. It is also known as a De-Reeler System...
Tensioner is used to apply measured clamping force on the conductors during the winding operation. This results in a uniform pulling force ...
The ISO-Static Coil Pressing Device is a portable hydraulic coil pressing device.
Its basic features are:
Hydraulic jacks on the pressing table have a valve to hold the pressure after disconnecting the power pack.
Formertron manufactures Looping machines required for making diamond coils of MV & HV Motors. The machine has an end to end adjustable pin arrangement and is equipped ....
Formertron manufactures Shield Ring Taping machines consisting of a taping head ring closely guided in the inner diameter of an outer ring. The outer ring is mounted firmly on a fabricated and machined base
A Conductor Pressing Device is used for a compact and tight coil. The coil is pressed both radially and axially during the winding process, and the pressing force is adjustable per the customer’s requirement ...
The Half Moon Cutting Tool is used for semi-circular cutting of copper conductors used in the winding process for distribution & power transformers. The tool can be furnished stand alone or mounted on a portable trolley for convenience.
Trusted By Largest Of Businesses
